electrodes

  • Home
  • Electrode Datasheets
    • Silver | Silver Chloride
      • LD10
      • LD15
      • LD25
      • LD135
    • Graphite Electrodes
    • Seawater Electrodes
      • LD10W
      • LD15W
      • LD25W
      • LD200W
    • Combined Potential & Current Measurements
    • Zinc Electrode
  • Installation Procedure
    • Silver | Silver Chloride
      • LD10
      • LD15
      • LD25
      • LD135
    • Combined Potential & Current Measurements
  • Corrosion Consultants
  • About Us
  • Contact Us

Electrode Datasheets | Installation

  • Sea Water LD25W Electrode Datasheet

    • Electrode Sea Water
    • Model LD25W

    Note: you can also download a pdf file of the data sheet for the LD25W.

    Download PDF

    .

     

    Specification

    Element Type:

    Ag, AgCI,
    Typical 3g silver per electrode

    Potential:

    In seawater the cells assume a potential which is dependent on the chloride ion concentration.

    Drift:

    less 3mV in 24 hours.
    Typically less than +/-10mV expected in 20 years.

    Dimensions:

    80 mm long x 24mm diameter nylon barrel

    Housing:

    White Nylon Barrel
    White Nylon Inserts

    Cable:

    Supplied to order

    Expected life:

    More than 50 years at a leakage current of 1μA will result in the loss of 1.0 grams of silver. The functional life of the electrode will most likely to be determined by the life of the associated cables.

  • Silver Chloride
    • Data Sheets
      • LD10
      • LD15
      • LD25
      • LD135
    • Installation Procedure
      • LD10
      • LD15
      • LD25
      • LD135
  • Graphite Electrodes
    • Data Sheets
  • Seawater Electrodes
    • Data Sheets
      • LD10W
      • LD15W
      • LD25W
      • LD200W
  • Combined Potential & Current Measurement Electrode
    • Data Sheets
    • Installation Procedure
  • Zinc Electrodes

Need Anything?

  • Request Electrode
  • Corrosion Consultants
  • Production | Purchase | Delivery
  • Quality Assured
  • Common Problems
  • Cable Specifications

Did you know?

We are often asked what would be a suitable DVM for monitoring our electrodes in service.

We recommend the Metrix MX56C Digital Multimeter which is a rugged unit suitable for site uses and has high and low input impedance . Details for the unit can be found by clicking here .

  • Contact
  • Back to top

Copyright © all rights reserved | Registered Company No. 2910807 | Site Design by SEO Company